Sensors That Do Not Detect Metal Chip / Burr

Metal burr formation is inevitable in machines where milling, grinding and drilling operations are performed. Due to the working principles of inductive sensors, this type of burrs and chips creates uncertainties and difficulties in detecting. These uncertainties can cause false or distorted signals to be passed to control systems.

The sensor manufacturer Contrinex has developed a series of M12, M18 and M30 body diameters for such applications, so as not to detect metal burrs accumulated on the sensor.

Sensors That Do Not Detect Metal Chip / Burr

Even if the sensor sensing surface is covered with iron, aluminum, stainless steel, brass, copper or titanium burrs, only the metal object at the target will be detected correctly.

IMMUNITY AGAINST IRON, ALUMINUM, STAINLESS STEEL, BRASS, COPPER and TITANIUM BURNERS

This series has also been developed for extra conditions and it is produced in one piece stainless steel body, IP68 and IP69K protection class, operating temperature range -25… + 85 ° C. These features provide privilege in the adaptation of the inductive sensor to the harsh conditions of the machine environment. In the versions with PNP output, I/O LINK feature, which is required within the scope of Industry 4.0, provides communication and parameterization with sensors, is standard.

It provides cost, maintenance and time saving advantages with its long lifetimes and working stability in the machine environment. In metal machining machines or working environments, there is no need to remove metal burrs accumulated on the sensor for stable operation of the sensor as in standard sensors.

Sensors That Do Not Detect Metal Chip / Burr

M12, M18 and M30 body diameters
Immunity to iron, aluminum, stainless steel, brass, copper and titanium burrs
Detecting the main target behind the metal burrs mentioned above
Robust, one-piece stainless steel body, IP68 and / or IP69K protection class
-25… + 85 ° C operating temperature range
Detection distances of 3, 5 and 12 mm
IO-Link Feature

Summary Overview of Sensors that do not detect Metal Chip / Burr

  • M12, M18 and M30 body diameters
  • Immunity to iron, aluminum, stainless steel, brass, copper and titanium burrs
  • Detecting the main target behind the metal burrs mentioned above
  • Robust, one-piece stainless steel body, IP68 and / or IP69K protection class
  • -25… + 85 ° C operating temperature range
  • Detection distances of 3, 5 and 12 mm
  • IO-Link Feature

 

You may also like...

1 Response

  1. July 2, 2020

    […] 4 and 8 Channel RTD] Analog Input modules can be connected directly to Pt and Ni resistance sensors. There is a red status LED on each model, indicating sensor errors (short circuit, cable break, out […]

Leave a Reply

Your email address will not be published. Required fields are marked *