Integrating Energy Saving with WAGO

When it comes to energy saving, the first thing that comes to mind is the efficient use of electrical energy. However, energy is not only used as electrical energy, it is used as many different types of energy. Especially in industrial establishments, energy, electricity, pressure, thermal etc. as it turns out. In order to save real and smart energy, it is necessary to have a system that measures and analyzes these different energy types together.

 

Efficiency of HVAC Systems

HVAC (Heating Ventilating and Air Conditioning) is a system that includes heating, ventilation and air conditioning, and finds wide application areas such as factories, hospitals, shopping malls and places where energy consumption is intense. The energy spent for HVAC systems accounts for 15 to 60% of the total consumed energy. For this reason, HVAC systems are very important in terms of energy efficiency.

Integrating Energy Saving with WAGO

All macro functions required to control the HVAC system have been developed by WAGO application engineers and are included in the software libraries. Thus, a significant time saving is achieved in project works.

Automatic control of HVAC systems both minimizes energy costs and offers a more comfortable and livable building. Planning of HVAC infrastructures should be supported by a deep knowledge, use of compatible systems together and correct programming.

Lighting Efficiency

Lighting control is not only good quality lighting design, but also to create a more flexible and easily controllable infrastructure. WAGO lighting automation system has the flexibility and wide range of products to provide solutions for all complex 1-10V analog, DALI, DMX and general dimming systems from on-off control of a single lamp.

Integrating Energy Saving with WAGO

It is used for lighting between 20% and 30% of your energy consumption. DALI # Lighting Automation ensures that 64 controllers are individually addressed and divided into 16 lighting groups and 16 lighting scenarios in the desired format. Thus, optimum lighting efficiency is provided.

DALI MULI-MASTER MODULE CAN OPERATE IN BACNET, KNX, ETHERNET CONTROLLER AND CAN TAKE 8 DIVISION MODULE UNDER A SINGLE CONTROLLER. IT IS POSSIBLE TO FEED AND CHECK THE SENSORS THROUGH DALI LINE INTEGRATED WAGO DALI SENSORS WITHOUT ADDITIONAL WIRING. THESE SENSORS MAY ALSO TAKE AN ACTIVE COMPONENT VALUE FOR HVAC, USING IT TO ALSO THE HVAC SYSTEM IN THE EVENT OF INTEGRATION WITH BACNET AT THE SAME TIME.

 

Click to go to our website about HVAC!


Energy Efficiency

Systematic energy management has a special importance in new building regulations in terms of energy classification of buildings. Continuous measurements of power expenditures in systems and analysis of these measurements have an important place in energy management. Energy saving can only be optimized by knowing under what condition, where, how much energy is spent.

With 3 different 3-phase analyzer modules offered by WAGO, many different parameters such as active and reactive energy, phase currents and voltages, power factor, phase sequence, frequency measurement, 4-zone operational analysis, measurement of home neutral currents up to 41th harmonic is to be provided to the user.

Integrating Energy Saving with WAGO

With 3 phase energy analyzer modules belonging to WAGO PLC family, you have a system integrated with PLC that does not require wiring or complex programming applications and can make reading cycle times as soon as possible.


What About Integration?

Additional software, complex converters, different computers, independent electrical panels and disconnected engineering powers are not used for the integration of these systems. The entire structure is built on a single wiring, a single computer software, and a single hardware-engineering power with a building management system. WAGO provides solutions with an extremely wide product range. Solutions with DALI, SMI, Enocean, M-BUS and DMX systems and WAGO brand lighting / asset sensors that can be used under these systems, brand independent HVAC field devices, analyzer for energy management, current transformer, meter monitoring etc. The products and the entire building automation system are solved without a single roof and integration problem.

Integrating Energy Saving with WAGO

 

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *